|Place of Origin:||China|
|Model Number:||Wire Mesh Filter Disc|
|Minimum Order Quantity:||1000 pcs|
|Packaging Details:||wooden cases|
|Delivery Time:||20-30 work days|
|Supply Ability:||10000pcs per day|
|Material:||Aisi304, 316L, Bronze, Brass, Plain Steel||Size:||Meeting Customers' Specific Requirements|
|Weave Type:||Plain Weave, Plain Dutch Weave||Shape:||Round, Ring, Crescent, Semicircle, Square, Oval, Abnormal|
|Layers:||Single Piece Or Multiple Layered||Application:||Absorption, Evaporation And Filtration Process In Petroleum, Chemical, Medicine, Metallurgy Etc|
stainless steel wire mesh filter,
metal mesh filter
Wire Mesh Filters
Wire mesh filter has a greater number of finer wires in the shute direction and is woven in both plain and twill weave patters. It is normally rated by the size particle it will retain, either as the absolute micron rating or the nominal micron rating, expressed in microns.
Filter wire cloth is utilized as filter fittings for chemical industry, medicine, petroleum, telecommunication, scientific research units etc.
These items are available from stock due to the fact that they're left over from an industrial job.
They are of the highest quality, and would provide an excellent tool for filtration applications.
Plain weave woven wire cloth is used for the majority of wire cloth woven by Hebei DaShang Wire Mesh Company. Each warp wire crosses alternately above and below every weft wire and vice versa.
Warp and weft wires are normally of the same diameter.
Plain weaves are used for the majority of commercial applications and for filtration where a high flow rate is required.
304 is the industry standard woven wire mesh stainless steel grade.
SS304 has a good oxidation resistance at roughly 870°C to 925°C depending on use and environment. We recommend 316 if you require a higher resistance to heat.
SS304 can be used for many applications. It is often found in kitchens, wine and beer making equipment, chemical containers, architectural panels and quarry screens.
Composition - C 0.08, Mn 2.0, Si 0.75, P 0.045, S 0.030, Cr 20.0, Ni 10.5, N 0.10
SS304 also has outstanding forming and welding characteristics.
This material can easily be cut with kitchen scissors. If you have stronger tools then these will work also.
When we are cutting this product in our factory we would use standard issue kitchen scissors as they give an accurate cut.
As a responsible supplier we always advocate the use of safety goggles if you have them.
Contact Person: admin