6" Width White Color 145g Fiber Glass For Heat Preservation

Introduction 

Glass fiber mesh cloth is based on glass fiber woven fabric, and is coated with high molecular weight emulsion. It has good alkali resistance, flexibility, and high tensile strength in the warp and weft directions, and can be widely used for heat preservation, waterproofing, and crack resistance of internal and external walls of buildings. The glass fiber mesh cloth is mainly alkali-resistant glass fiber mesh cloth. It is made of medium-alkali-free glass fiber yarn (the main component is silicate, which has good chemical stability) and is woven by a special structure-leno structure. Afterwards, it is subjected to high temperature heat setting treatment such as anti-alkali liquid and strengthening agent.

Construction method

1. Keep the walls clean and dry.

2. Put tape on the cracks and press tightly.

3. Make sure that the gap is covered by tape, then use a knife to cut off the excess tape, and finally apply the mortar.

4. Let it air dry, then lightly sand.

5. Fill enough paint to make the surface smooth. 6. Cut off the leaking tape. Then, notice that all the cracks have been properly repaired, and use fine composite materials to modify the surrounding areas of the joints to make them look as clean as new.

Where is the grid cloth generally used? 

The main purpose is widely used in: wall reinforcement materials (such as glass fiber wall mesh, GRC wallboard, EPS internal and external wall insulation board, gypsum board, etc.. Reinforced cement products (such as Roman columns, flue, etc.). Granite, Mosaic special mesh, marble backing mesh. Waterproof membrane cloth, asphalt roof waterproofing, reinforced plastics, rubber products skeleton materials, fireproof board, grinding wheel base cloth, geogrid for highway pavement, caulking tape for construction, etc.